PureAire Monitoring Systems, Inc.
28
After entering the relay state the display will default back to the Set Alarm 1 Polarity
menu. The display will scroll the following:
Push the joystick down to access the next sub menu;
Set Alarm 2 Polarity
will scroll
on the display. This is the menu at which to adjust the second level alarm polarity state
on the Air Check O
2
Monitor.
To change this value, push the joystick right to display the relay state. The display will
Indicate
INVERT.
Pushing the joystick down will change the relay state from INVERT
to NORMAL. Press
ENTER
to accept the value.
After entering the relay state the display will default back to the Set Relay 2 Alarm
Threshold menu. The display will scroll the following:
Push the joystick down to access the next sub menu;
Set Audio Alarm Polarity
will
scroll on the display. This is the menu at which to adjust the second level alarm polarity
state on the Air Check O
2
Monitor.
NOTE:
The O
2
system must have the audio alarm option module installed to access
this menu. If this option is installed the display will indicate N/A, (not available)
INVERT
20.9%
NORMAL
20.9%
..Set Alarm Polarity..
20.9%
INVERT
20.9%
NORMAL
20.9%
..Set Alarm 2 Polarity..
20.9%
..Set Alarm 2 Polarity ..
20.9%
..Set Audio Alarm Polarity...
20.9%
