Pure Fitness 8643HE, Руководство пользователя

Страница: 8 / 13

STEP 3: Assemble Upper Frame.
Locate: Upper Frame (4), 2x Cushions (17), 4x M8*55 Bolts (8), 4x M8 Wash-
ers (6), 2x Handle Grip Foam (16), 1x Lock Knob (5), 1x Oval End Cap (11),
2x Small Round End Caps (14), and 4x Small Square End Caps (4).
A. Attach a cushion to the each side of the Upper Frame. Place a M8
Washer on each of the 4x M8*55 Bolts, and secure the Cushions to
the welded bars on the Upper Frame. DO NOT OVERTIGHTEN: The
bolts should be secure, but do not tighten the bolts too much or you
may damage the bolt housings.
B. *Place a Handle Foam Grip (16) on each handle on the Upper
Frame. *Note: If you have difficulty attaching the Foam Grips, use a
small amount of a mixture of non-chemical hand soap and water to
very lightly lubricate the handles before sliding on the Grips. If the
grips are applied using soapy water, you must allow this to fully dry
before using your Hyper Extension bench.
C. Place 2x Small Round End Caps (14) into the handle grip ends.
Place 4x Small Square End Caps (18) into the ends of the cushion
bars. Place 1x Oval End Cap into the Top of the Upper Frame (4).
D. Place the assembled Upper Frame into the Main Frame (2). Secure
the Upper Frame at the desired height using the Lock Knob (5).
Make sure the Upper Frame piece is secure in its housing before
beginning use: NEVER sit on, mount, use or transport the
Hyper Extension Bench without the Lock Knob fully tightened
down and secure.
ASSEMBLY INSTRUCTIONS (CONTINUED)