background image

8

9

CLEANING (CONT'D)

If scale becomes difficult to remove with brush:

1.  Fill the base with a mixture of 1 tsp. white vinegar and 1 tsp. 

water.

2.  Let the solution stand for 5 minutes.

3.  While the vinegar is in the base, clean all of the interior surfaces 

with a soft cloth or brush to help remove scale.

4.  Check for buildup in the mist nozzle and mist tube. Clean as 

needed.

5.  Rinse the base thoroughly with water to remove scale and all of 

the vinegar solution.

6.  If minerals in your water are producing a white dust, you may 

use a decalcification cartridge or humidifier cleaner cartridge to 

keep the tank clean.

END OF SEASON STORAGE

• 

Follow the General Cleaning and Descaling instructions on 

pages 8-9 to get your humidifier ready for storage at the end of 

the season.

• 

Dry the humidifier completely before storing. DO NOT store with 

water inside the base or water tank.

• 

Pack the unit in its original box and store in a cool, dry location.

NOTE: IF YOU EXPERIENCE A PROBLEM WITH THIS PRODUCT, 

DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING BY 

YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND 

CAUSE DAMAGE TO THE HUMIDIFIER OR PERSONAL INJURY.

TROUBLESHOOTING

If you are having problems with your humidifier, see if one of the 

solutions below resolves the problem before contacting Pure 

Enrichment.

 

Problem

Solution

Water vapor and 

humidity are not being 

produced.

Power plug:

 Unplug and then try again.

Power Failure:

 When power returns, try again.

Tank Installation:

 Ensure tank is attached 

properly.

Dirty ultrasonic disk:

 Clean disk (see page 9)

Air blows but water 

vapor is not produced.

Excessive Water:

 Pour out extra water.

Residue inside tank: 

Wash tank and try again.

Dirty ultrasonic disk

: Clean disk (see page 9)

If you use hard water, replace with softer water.

Humidity level is low.

Dirty ultrasonic disk

: Clean disk (see page 9)

Water in unit is too cold:

 Replace with cool 

water.

The humidity has a bad

smell.

Poor maintenance or dirty water:

 Clean 

humidifier thoroughly, and fill with fresh water.

White dust is forming on

nearby furniture.

Hard water may deposit dust:

 Dust in the air 

also settles because of added humidity in the 

room. Use distilled water if it persists.

Humidifier has stopped 

working.

No or low water:

 Unplug unit and refill tank.

Water is accumulating

outside of unit or area

surrounding unit.

Saturation of humidity:

 Lower mist control 

setting.

Unit not level and water is accumulating: 

Unplug and place on level surface. 

Point spray away from objects:

 Raise unit 

on a water-resistant level surface 2-3 feet off of 

floor.

Water dripping when

refilling.

Water remaining on bottom of tank:

 Wipe tank 

or tilt to drain before transporting.

Increased noise level.

Unit must be placed on a flat, level, hard 

surface:

 Make sure it is NOT placed on a soft or 

absorbent surface.

Red light on power dial.

Red LED light indicates low water: 

Unplug 

and refill tank.

10

11

Содержание MistAire Studio








Отзывы: