Quest Engineering HI-E Dry 100, Инструкции по установке, эксплуатации и обслуживанию

Страница: 1 / 16

HI-E Dry 100 HI-E Dry 100
Installation, Operation and Maintenance Instructions
– Read and Save These Instructions –
This manual is provided to acquaint you with
the humidity control device so that installation,
operation and maintenance can proceed
successfully. Ultimate satisfaction depends
on the quality of installation and a thorough
understanding of this equipment. The humidity
control device is built around tested engineering
principles and has passed a thorough inspection
for quality of workmanship and function.
Installation, Operation and Maintenance Instructions
4201 Lien Rd.
Madison, WI 53704 Toll-Free 1-800-533-7533
www.QuestProtect.com sales@QuestProtect.com
– Read and Save These Instructions –
Specifications subject to change without notice.
TS-598
04/14
1
HI-E Dry 100:
• Controlled by a dehumidistat with settings
from 20 to 80 percent relative humidity and a
positive “on” and “off” setting.
• Contains a blower switch that permits
continuous blower operation independent of
dehumidification.
• Portable and provided with four casters.
• Contains an internal condensate pump capable
of lifting condensate 17 feet and 20 feet of
condensate hose.
• Wiring is through a factory installed six foot
power cord; 115 volt with ground.
• Environmentally friendly R410A refrigerant.
Water Removal Rates (Pints/Day)
172 pints 90˚F, 90%
129 pints 80˚F, 80%
110 pints 80˚F, 60% (AHAM)
113 pints 70˚F, 80%
83 pints 70˚F, 60%
94 pints 60˚F, 80%
64 pints 60˚F, 60%
67 pints 50˚F, 80%
25 pints 50˚F, 60%
quest
quest