Pumpex K 152, Инструкция по эксплуатации, Страница: 3 / 16

3 (15)
K152/202/203/252/302.58.0101.Eng/Digital
SERVICE INSTRUCTION
K 152, 202, 203, 252, 302
Pump design
The design of the pump features high reliability and easy main-
tenance. The major parts of the pump are few in numbers and do
not require special tools during disassembly and assembly.
The electric motor unit consist of Stator Unit (Stator and Stator
Housing), Rotor Unit (Rotor, Shaft and Bearings) Impeller, Oil
Housing, Mechanical Shaft Seal Unit and Junction Box (Junction
Box Cover, Terminal Board and Cable Entries).
The motors are always equipped with a maintenance-free
internal, closed loop cooling system which dissipates the heat to
the liquid that is being pumped.
An exchange system is used for the Stator Unit and Mechanical
Shaft Seal Unit.
Box 5207 S - 12116 JOHANNESHOV SWEDEN
5
6
7
8
9
1
2
3
4
K 80
No 99999999 P.2 2.0 kW 3 Ph 50 Hz
U 400 V Y n 1385 rpm Class F IP68
I 5,4 A 98 kg
20 m
1 Type of pump
2 Serial number
3 Working voltage
4 Rated current
5 Rated output
6 Engine speed
7 Frequency
8 Winding class
9 Weight
A Type of pump
B Serial number
C Working voltage
D Rated current
E Rated output
F Cos
ϕ
G Frequency
H Head
I
Speed
Technical data
The technical data are stamped on the data plate, which is
located under the pump handle.