www.pulsar.pl
INTRW
25
5.2 Configuration of the PSU with an LED display.
Setting the address of the PSU.
- press the ‘<,>’ right and left-most buttons simultaneously
on the LED panel
- when the abbr ‘Adr’ appears, press ‘OK.’
- with ‘>’ or ‘<’ set the address from 1 to 247
- approve the set address with the ‘OK’ button
Setting the parameters of the serial port.
- press the ‘<,>’ right and left-most buttons simultaneously on the LED panel
- the abbr ‘Adr’ will appear on the display
- press the ‘>’ right arrow button
- the abbr ‘trS’ will appear on the display
- press ‘OK’
- now, on the display there will appear either ‘9.6’ or ‘19.2’ – values
informing of the transmission’s speed
- with ‘>’ or ‘<’ set the transmission’s speed to 19200,
which is displayed as ‘19.2’
- approve the setting with the ‘OK’ button
- the abbr ‘trS’ will be displayed again
- press the ‘>’ right arrow button
- press ‘OK’ after appearing of ‘trP’ on the display
