www.pulsar.pl
INTRE
7
4.4 STEP 2 – The IP address configuration.
For proper IP address change, it is recommended to turn off the firewall of the antivirus program for the
time of configuration process.
Run the ‘Digi Device Discovery’ program with
icon. After launching, the program will display the
Ethernet interface logged to the router. Identification of our module can be done by comparing the MAC addresses.
Fig. 4. Window of the ‘Digi Device Discovery’ program
showing a logged-in Ethernet interface.
The MAC address of the interface is located under the barcode of the DIGI module.
Fig. 5. The MAC address located on the DIGI module.
In order to facilitate the further use of the devices in the network, change the IP address assignment
from automatic to manual. To do that, press the right mouse button on the line with the selected interface and
choose „Configure network settings” option”.
