www.pulsar.pl
INTRE
23
5.3 Configuration of power supplies of the EN54 series with LCD display.
5.3.1
Setting the communication address
The PSU fitted with LCD display enables setting the communication parameters of the serial port from the LCD
panel. To enter the setup mode, press the „SET” button from the main screen
.
-
use the „<” or „>” buttons to display the
PSU
menu
- press the „SET” button
- use the „<” or „>” buttons to choose the
Communication address
- press the „SET” button, the prompt will appear at the end of the line
- use the „<” or „>” buttons to set the address
1÷ 247
– address of the PSU during the communication with the computer
- confirm by pressing the „SET” button
