fEATURES:
fITTINg/REPLAcINg BATTERIES:
1. make sure to turn off both the unit and the receiver prior to fitting or replacing batteries.
2. take in care to gently slide downward the battery compartment to access the battery compartment. insert the new batteries and ensure of the
correct polarity.
3. first ensure of the correct polarity and then insert the new batteries.
4. gently slide the battery compartment cover upward and ensure it has a good seal by firmly pushing the edging of the battery cover.
BATTERIES REQUIREMENTS:
the Pulsars adS mini alarms require 2xaaa (1.5v – alkaline lR03/mN2400) batteries.
the Pulsars adS mini Receiver requires 1x9v PP3 (alkaline 6lR61) battery.
the use of good quality batteries is essential for maximum battery life and optimum performance.
to reduce the risk of battery leakage:
• dO NOt mix old and new batteries
• dO NOt mix different battery types
• the use of rechargeable batteries is NOt recommended
• Please ensure the batteries are removed from the Pulsars during long periods without use.
Notice:
• the max. battery voltage should no more than 5v for Unit and no more 10v for Receiver, otherwise, may have the internal electronics
parts damaged.
• to save energy, the Pulsar adS mini should be powered off in case no usage.
Thank you for purchasing the Pulsar ADS Mini Bite Detection System. Since it was introduced, the Pulsar has
set new standards for bite indication and reliability in all conditions and we are sure your purchase will prove
to be a worthwhile investment that will last you several years. Pulsar ADS Mini is a ultra-reliable, compact,
high quality, bite indicator set packed with the latest cutting edges technologies.
Volume, Tone, Sensitivity & Wireless.
volume,
tone and sensitivity can be adjusted by pressing
dedicated controls, familiarise yourself with the
controls before connecting the batteries.
Ultra Long Range Signal.
Pulsar adS mini con-
tains and advanced transmitter device, capable of
long distances.
Run ‘N Drop Bite Detection.
the alarms are able
to detect running or drop back bites, whilst the
receiver will alert you for a drop back bite with a
dedicated led and sound.
Audible & Visual Replication.
Each sound pulse
and led flash from the bite alarm is replicated exact-
ly at the receiver, thus to eliminate strikes on false
triggering caused by the wind and water movement.
Multi-Channel Receiver.
the receiver works with
up to four different channels, so up to four units can
be used at once.
Easy Syncro.
Sync the units on the receiver has
never been so easy, just with the push of Syncro
button on the receiver the unique identification code
will be registered.
Silent & Vibro Mode.
the units can be set to si-
lent mode without the need to switch-off, while the
receiver can be set to “Sound”, “Sound+vibro” or
“vibration” mode.
Low Battery Warning.
the Pulsars continuously
monitor the battery voltage and detects its failing
with audible/visual warnings which are also trans-
mitted where specified.
Induction Night-Light.
the led Night-light glim-
mer continuously confirming that the alarm is
switched on, the function can be easily switched
On/Off by a dedicated button in front of the alarm.
Energy Saver Circuit.
the Pulsars are designed to
reduce at minimum the battery consumption with
advanced energy saver devices.
Memory Function.
the units and the re-
ceivers remembers all personal settings
when changing batteries or turning them off.
Weather-Proof Body.
the Pulsars have
been designed to be totally weatherproof
and withstand to the most rigor conditions.
2 Years Warranty.
Pulsars are supplied
with a two years warranty terms as a
standard.
WARRANT
YEARS
Y
