CPS20.241-60
C-Series
24V,
400W,
DC/DC
C
ONVERTER
Sep. 2019 / Rev. 1.1 DS-CPS20.241-60-EN
All parameters are specified at 24.5V, 16.3A, 110Vdc, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
17/22
22.
A
CCESSORIES
22.1.
ZM2.WALL
-
W
ALL
M
OUNTING
B
RACKET
This bracket is used to mount the DC/DC converter
onto a flat surface without utilizing a DIN-Rail.
Due to the small size of the unit, it is required that the black-DIN-rail slide on the back of the unit must be removed.
Instructions how to do this can be found in the manual of the ZM2.WALL.
22.2.
ZM13.SIDE
-
S
IDE
M
OUNTING
B
RACKET
This bracket is used to mount DIMENSION units sideways with or without utilizing a DIN-Rail. The two aluminum
brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Side mounting with DIN-rail brackets
Side mounting without DIN-rail brackets
