PTZ Optics 20X-ZCAM, Руководство пользователя

Страница: 8 / 42

5
Serial Communication Control
In default working mode, the camera is able to connect to a VISCA or Pelco controller with an RS485 serial interface.

RS485 Communication Control
The camera can be controlled via RS485, Half-duplex mode, with support for VISCA, Pelco-D or Pelco-P protocol.
The parameters of RS485 are as follows:

Baud rate: 2400, 4800 or 9600 bps.

Start bit: 1 bit.

Data bit: 8 bits.

Stop bit: 1 bit.

Parity bit: none.
Note : As this camera does not have pan or tilt functionality, not all of the commands in the following command lists will apply.