HDBaseT 4x4 Matrix Switcher-N
3
⑦
OUTPUTS
Output buttons, ranging from "1" to "4", correspond to the 4
HDBaseT outputs ports.
With the front control panel, the switcher could be controlled directly and rapidly by
pressing the buttons in this order: “Input Channel” + “AV” + “Output Channel”
“Input Channel”: Fill with the number of input channel to be controlled.
“Output Channel”: Fill with the number of output channels to be controlled.
2.2 Rear Panel
No.
Name
Description
①
IR ALL IN
IR control signal input port, connect with IR receiver, pass
through to all the HDBaseT ports to control remote devices.
②
HDMI
INPUTS
HDMI input ports, 4 in total, type A female HDMI connector,
connect with HDMI input source devices.
③
IR OUT
Connect with IR transmitter, to emit the IR signal sent from the
HDBaseT ports of the far-end Receiver. These IR OUTs make
up an IR matrix with the IR INs on the HDBaseT receivers, and
all IR signals can be switched
synchronously
with the AV
signal, or separately switched.
④
OUTPUTS
IR IN
: Connect with IR receiver, fixed IR input for the output,
cannot be switched separately. It makes up an IR bi-directional
transmission with the IR OUT on the corresponding HDBaseT
receiver.
HDMI
: HDMI output port, connect with HDMI displayers,
deliver same input signals with HDBaseT ports, split HDMI
output for local monitoring.
COAX
: HDMI de-embedded digital audio output.
HDBaseT
: Works with HDBaseT receivers, such as the HDMI