HDBaseT 4x4 Matrix Switcher-N
11
The 4 “IR OUT” ports make up a 4x4 IR matrix with the “IR IN” ports of the far-end
receivers. See as below:
Control Local Devices or the HDBaseT 4x4 Matrix Switcher-N Remotely
The IR signal is received from corresponding IR remote, then transferred to HDBaseT
receiver, then to corresponding zone of the matrix through the twisted pair, finally
transferred to IR OUT port and received by controlled device.
Switching Operation
:
a) Sending command (reference to 5.3 RS232 Control)
: [x1]R[x2].
x1: Corresponding to the 4 IR OUT ports of the matrix, The IR transmitter connected
to this port can be placed at IR receiving area of output device or the matrix itself.
x2: Corresponding to the zone number (IR signal transmit to the HDBaseT receiver
and then gets to HDBaseT port of this zone via the twisted pair)
E.g.
: Command “3R2.” means to transfer IR signal received from zone 2 to IR OUT
port 3.
b) Using IR remote
: Input channel
button
IR
Output channel
Input channel: the 4 INPUTS buttons, corresponding to the 4 IR OUT ports of the
matrix.
Output channel: the 4 OUTPUTS buttons, corresponding to the zone (receive IR
signal from HDBaseT receiver with IR IN port connects with IR receiver) number of
the matrix.
E.g.: Press buttons “3”, “IR”, “1” in order, “3” in OUTPUTS area, “1” in INPUTS area,
to transfer IR signal received from zone 3 to IR OUT port 1.