PTM HL 20, Инструкция по эксплуатации

Страница: 14 / 35

HL Series – Instructions manual
14
FLYING WEIGHT PARAMETERS
ONLY FOR HL Series 25-30-50
with OUTPUT LOADS/UNLOADS modality activated
This menu, allows to set the cue parameters in the load/unload operations:

FLYING WEIGHT : Allows to set the flying weight

FLYING TIME : allows to set the flying time that is that time in which the
system waits for the flying weight to go down.
menu menu menu menu
MANUAL TOP CUT
ONLY FOR HL Series 30-50
This menu allows three TopCut modalities:

STATIC : it will be the user to allow the IN and OUT of the knifes with the
dedicated key.

RECIPES TIMES : The knifes IN and OUT times are those set in the recipes
advances settings. Those times will be different for each recipe.

DEDICATED TIMES : Allows to set the IN e OUT knifes times, not depending
on the selected recipe.
menu
menu menu
menu
menu menu menu menu
menu menu menu menu
CLOCK
This menu allows to visualize and set the hour and date.
Press to select and confirm
Press and to modify. Press to exit
menu
menu menu
menu
SUPPLY VOLTAGE
This menu permits to visualize the supply voltage value applied to the HL series
weighing indicator,
menu
menu menu
menu
CONTRAST
This menu is used to set out the contrast of the graphic display. The 5 digits big
display is automatically contrasted.
Press the keys and to change the value.
menu
menu menu
menu