PTC Mirage 3000, Инструкция по установке, эксплуатации и использованию

Страница: 5 / 26

5
www.tpcdental.com
Mirage Model 4000 unpacking instructions
Remove the pump cover from the chair
base. To remove the pump cover you
must first remove the three safely screws.
Once screws are removed lift up on the
cover to remove it. Figure 2
Loosen and remove the two packing
screws holding the chair to the pallet.
Figure 3
Place the chair carton close to the
planned area that you wish to install the
dental chair. Do not turn the carton on its
side as oil will drain out of the tank
reservoir. Damage may occur if the chair
is tipped over. Remove all the staples
securing the carton to pallet, or cut the
carton just above the staple line, and
remove Carton. Figure 1
When lifting the dental chair use extreme
caution. The chair weight is
approximately 310 LBS. Always use at
least two people when attempting to lift
the dental chair. See image below for use
of proper lift points. Never lift the dental
chair via the arm rests.
Upper lift location
Lower lift location
Figure 1
Figure 2
Figure 3