8
www.tpcdental.com
Installing the upholstery
1.
Open the bolt package included in your upholstery box.
2.
Locate the nuts and bolts shown in figure 1.
3.
Attach the nuts to the bolts and place them in the backrest frame as shown in figure 2. Adjust
the nut so that the head of the bolt and the back of the nut are able to slide up and down with
little resistance in the backrest bracket.
4.
Once the space is adjusted remove the bolts with the nuts still attached and try to keep the
spacing the same.
5.
Place the bolts into the backrest as shown in figure 3
6.
Slide the upholstery into the backrest bracket. Press gently on the seat back cushion side so
that all four bolts align properly within the backrest bracket. Once aligned apply pressure to
the top of the upholstery and lock it into place. Figure 4
Figure 1
Figure 3
Figure 2
Figure 4
Содержание Mirage 3000
Страница 16: ...16 www tpcdental com Main PCB Board ...
Страница 17: ...17 www tpcdental com Wiring schematic 1 ...
Страница 18: ...18 www tpcdental com Wiring schematic ...
