PTC Mirage 3000, Инструкция по установке, эксплуатации и использованию

Страница: 12 / 26

12
www.tpcdental.com
Overview of foot control operations
1. Seat Height Adjustments
-
To raise, press down on upper area of the foot control disc.
-
To lower, press down on the lower area of the foot control disc.
2. Backrest Adjustments
-
To raise, press down on right side of the foot control disc.
-
To recline, press down on left side of foot control disc.
3. Preset Operation
-
Momentarily press pre set switch (#1, or #2) on the foot control.
4. Adjusting Preset
The preset mode is factory installed but can be changed at your convenience as shown below.
Set backrest angle and seat height to desired position using the foot control. Press and hold the preset
position 1 or 2 on foot control. You will hear an initial tone when the button is pressed. After about 5
seconds you will hear a confirm tone. Now that preset position is programmed.
5. Automatic Return
Momentarily press 0 switch on foot control to activate chair to return to normal position.
6. Last position L/P
When the LP button is pressed the backrest will move to its last position that it was placed.
Chair Base up
Chair Base down
Preset 1
Preset 2
Auto Return
Last Position
Chair Back UP
Chair back down