Psion VH10, Руководство пользователя

Страница: 20 / 166

Chapter 2: Basic Operation
Performing a Warm Reset
Psion VH10 Vehicle-Mount Computer User Manual
12
2.5.1 Performing a Warm Reset
During a warm reset , running programs are halted. The contents of the file system, RAM Disk, Flash Disk,
and the registry are preserved.
• Press and hold down the [BLUE] key and the [ENTER] key simultaneously for a minimum of
six seconds.
2.5.2 Performing a Cold Reset
A cold reset reinitializes all hardware. All RAM including the RAM Disk is erased. Non-volatile storage such
as the Flash Disk is preserved, as is the file system.
To execute a cold reset:
• Press and hold down the [ORANGE] key, the [BLUE] key, and the [ENTER] key, simultaneously for
a minimum of six seconds.
2.5.3 Performing a Clean Start
A clean start returns the VH10 to factory settings, flushes the registry keys, and deletes volatile storage and
the file system. The Flash Disk is preserved.
• Press and hold down the [BLUE] key, the [ENTER] key, and the [SPACE] key simultaneously for a
minimum of six seconds.
The VH10 displays the Boot to BooSt menu.
• Type .clean . ( or .25326 )
2.5.4 Boot to BooSt
If you choose Boot to BooSt, the BooSt menu is loaded.
• Press and hold down the [BLUE] key, the [ENTER] key, and the [SPACE] key for a minimum of
six seconds.
• Press [1] to launch the OS .
2.6 Calibrating the Touchscreen
The VH10 touchscreen feature is factory-calibrated and ready-to-go; however, over time the touchscreen's
operating parameters may change, and it may need to be recalibrated for correct operation. Refer to “Cali-
brating the Touchscreen” on page 18 for details.
2.7 Connectivity
Data transfer options vary slightly depending on the type of operating system installed in your PC. Various
options exist depending on whether you are using Windows XP or earlier, Windows Vista
®
, Windows 7 or
later. For information on connecting the VH10 to a PC, please refer to “Data Transfer between VH10 and a
PC” on page 52.
The VH10 contains an integrated 802.11a/b/g/n radio module. The Wi-Fi Config application is used to config-
ure the radio for one or more wireless network profiles. To configure the radio, follow the steps outlined
under the heading “Wi-Fi Config” on page 100.
To configure your Bluetooth settings, please go to “Bluetooth® Setup” on page 42.
To see the radio specifications, please go to “Wireless Radios” on page A-5.
Note: You need to reset your VH10 after configuring the radio by switching between Windows Zero
Config and WiFi Config.
Note: As part of the normal Windows Embedded CE cold boot process, the screen may go blank for
a few seconds after the splash screen loading bar reaches the end. The desktop is displayed
after a few moments.
Note: The touchscreen function can be turned off (see “Touch” on page 91).