Psion VH10, Руководство пользователя

Страница: 102 / 166

Chapter 4: Configuration
Creating a Clone
Psion VH10 Vehicle-Mount Computer User Manual
94
- Tap on Start . A backup of the current settings will be created and saved to the specified location.
The unit will then reboot.
To view profiles and choose restore options, refer to “Managing Profiles” on page 95.
4.24.2 Creating a Clone
Cloning allows you to copy settings or configurations from one computer to another. There are two types of
clones to choose from: a
Full Clone and a Settings Only Clone .
A Full Clone contains all files, most of the registry, and the settings files.
A Settings Only Clone can be copied to a wider array of devices, but it should not be used as an
autorestore profile.
• Tap on the Create Clone button to begin the process. Your VH10 model type and OS will be identified in
the cloning statement to ensure that you target devices of the same type. Give the clone profile a
name and location, then tap on
Next .
• In this menu, select All for a Full Clone , or Selected Options for a Settings Only Clone . If you choose
Selected Options , a menu will open to enable you to decide which options you want cloned.
Important: Store profiles on a persistent drive since profiles not stored in persistent memory (Flash
Disk, external USB drive) will be erased during a clean boot.
When performing an autorestore, the program only searches for the profile located in the
\Flash Disk\TotalRecall folder. If you store your profile anywhere else it will not be
restored. Only one profile can reside in that folder.
Important: The target device for a Full Clone MUST have the same model type and OS build as the
source, otherwise problems can occur. For example, if the target device has a newer build
of the OS, the new build may have a different set of registry keys that may conflict with
the source.