ALF-13131-E-02
All-Flo
15
STEP 7
In order to remove “Outer Cham-
bers”, using two ½ inch wrenches,
remove eight “Hex Head Cap Screws
(5/16”–18 x 1-3/4”)”, eight “Flat and
Lock Washers (5/16”)” and eight
“Hex Flange Nuts (5/16”-18)” from
each side.
STEP 8
Remove both “Outer Chambers”
from the “Intermediate”.
STEP 9
Using two ¾ Inch wrenches,
remove “Outer Diaphragm Plate”,
“Diaphragm”, “Inner Diaphragm
Plate” and “Flat Washer (1/4”)”
from one side of the pump.
STEP 10
Placing the ¾ inch wrench on the remaining “Outer Diaphragm Plate”,
and the 7/16 inch wrench on the “Diaphragm Rod Assembly”, remove the
remaining “Outer Diaphragm Plate”, “Diaphragm”, “Inner Diaphragm
Plate” and “Flat Washer (1/4”)” from the other side of the pump.
PUMP WET END ASSEMBLY
To assemble the wet end of the pump, reverse the order of disassembly.
Ensure all hardware is fastened in accordance with torque specifications
(see page 19). Inverting one of the diaphragms during reassembly will
facilitate ease of assembly.
