PSC Mini PowerWedge, Руководство пользователя

Страница: 9 / 72

User’s Guide
5
Using a Magnetic Stripe Reader (MSR) or
I.D. Badge Reader
After completing the installation, you can replace the bar code reader
with a magnetic stripe reader or I.D. badge reader.
To attach an MSR or I.D. badge reader . . .
1. Move the On/Off/Program switch on the Mini PowerWedge
to the
OFF
position (see Figure 1-1).
2. Remove any device attached to the
INPUT
connector on the
Mini PowerWedge.
3. Plug the MSR or badge reader connector into the
INPUT
con-
nector.
4. Move the On/Off/Program switch to the
ON
position.
WARNING
Always make sure the On/Off/Program switch on
the Mini PowerWedge is in the off position before
attaching or removing a magnetic stripe reader or
I.D. badge reader. Having the switch in any other
position may damage the decoder, input device, or
computer.