PSC Mini PowerWedge, Руководство пользователя

Страница: 23 / 72

User’s Guide
19
8. When you are finished checking or changing parameter set-
tings, type
EE at the prompt and press
ENTER
. This will save
your changes and exit on-screen programming.
9. If you are programming in DOS, press
CTRL
+
Z
to return to
the DOS prompt.
Displaying and Printing Current Settings
While you are in on-screen programming mode, you can display the
current settings for all the parameters. At the main menu prompt,
type
E
and press
ENTER
, and then type
D
and press
ENTER
again. At
the next prompt, type
1
and press
ENTER
. A list of all the parameters
will appear on your screen. To pause the display of the list at any
time, press the
PAUSE
key on your keyboard; then press any key to
continue the display.
If you are using a text editor, you can use commands in the editor’s
menu to print the list of settings or save it to a file. If you are working
from the DOS prompt, you can also save or print the list of settings.
To print or save the list, follow steps 1 through 9 above, with the fol-
lowing changes in step 2:
• To print the list, use the following command: copy con prn .
• To save the list as a file, use the following command: copy
con filename .
NOTE
To leave on-screen programming without saving any
changes, type EF and press
ENTER
.