PSC Mini PowerWedge, Руководство пользователя

Страница: 22 / 72

18
Mini PowerWedge
®
Notice that the parameters in this list are also identified by numbers
and letters. The value following the equals sign (=) in each line is the
current setting for that parameter (0 means Off, and 1 means On). The
last line is the input prompt.
5. Type the I.D. of the parameter whose setting you want to
change, and press
ENTER
. A prompt will display the valid set-
tings for the parameter in parentheses and separated by a
“pipe” character (¦), as shown in the following example:
ENABLE UPC-A (0¦1):
6. Type the setting you want to use, and press
ENTER
. The list of
options will be redisplayed to verify the change you made.
7. Select another option from the list, or press the
BACKSPACE
key to return to the main menu.
NOTE
To return to the previous menu level, press the
backspace key on your keyboard.
UPC-A
0 ENABLE=1
1 TRANSMIT SYSTEM DIGIT=1
2 TRANSMIT CHECKSUM=0
3 CONVERT UPC-A TO EAN-13=0
UPC-E
4 SYSTEM DIGIT 0 ENABLE=1
5 SYSTEM DIGIT 1 ENABLE=1
6 CONVERT UPC-E TO UPC-A=0
7 TRANSMIT SYSTEM DIGIT=0
8 TRANSMIT CHECKSUM=0
EAN/JAN
9 EAN/JAN-8 ENABLE=1
A EAN/JAN-13 ENABLE=1
EXTENSIONS
C ALLOW 2 DIGIT EXTENSIONS=1
D ALLOW 5 DIGIT EXTENSIONS=1
E REQUIRE EXTENSIONS=0
F CONVERT ISBN TO EAN-13=0
(0-E):
FIGURE 3-2
On-screen programming options for UPC and EAN bar codes