9
Attach Gas Shocks to Wall Brackets
1.
*ATTENTION: TEAM LIFT the rack by holding each upright and pushing up against the wall. NOTE:
The rack will be heavy. Use the included bent pin(s) to lock the rack in the up position.
2.
Attach the gas shocks to ‘ears’ of the wall brackets with the 5/16” serrated flange nut (#10 already
attached to the shock) and tighten using a 7/16” open-ended wrench and 1/2” socket.
3. Repeat for all shocks.
4.
Move the rack from the up position to the down position. It should move with ease. If it feels ‘stiff,’
loosen the pivot points slightly until it moves smoothly.
That’s it!
Please send a video or photo of your rack in action to
[email protected] when complete. We would love
to see it!
10