Displaying and changing the values in the menus
19
1.3
Controlling switching outputs in the "Manual mode"
menu
The "Manual mode" menu allows the controller's switching outputs to be turned on and
off for test purposes. To enable the controller to run in automatic mode again, you have to
exit manual mode after completion of setting tasks.
ATTENTION
Risk of system malfunctions due to incorrect settings.
Make sure that only specialist personnel ever make any changes to the
values in this menu.
Menu item
Description
Output R0–R7, HE1-HE3
Switch switching output R0–R7, HE1-HE3 on or off manually.
Depending on the hydraulic layout which has been set, only the
switching outputs in use will be displayed.
Delayed off
When the menu is closed, the controller will switch to automatic
mode after the delayed off has elapsed.
All outputs in manual mode remain active during the delayed off
period. In the "Info" menu, a hand symbol appears instead of the
pump symbol.
