Proyecson PAA20+, Руководство по установке

Страница: 67 / 148

8.3.2 Setting up output cues for Doremi, Dolby and NEC IMS servers
(non-library method)
Once the device is added, set up the “cues” in order to manage the PAA20+
outputs. There are two methods to do this: the first one is to add the output
cues (
only valid for output cues , not for trigger cues) following the Doremi
Macro Editor Manual.
1. Open the “Macro Editor”, by accessing it through the
ADMINISTRATION -> MACRO EDITOR
→
. AUTOMATION CUE . to
create a new “Macro” and name it, as shown in Figure 8.3.2A .
Figure 8.3.2A
2. Expand the “Select an action to insert” drop-down tab and select the
“Send Message” option while the new created macro is selected. See
figure 8.3.2B .
3. Once the “Send Message” is selected, click on the “ Insert ” button.
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 67