Proxomed Compass 600, Руководство пользователя

Страница: 12 / 53

12
4 Storage, transport and installation
Store the devices dry, free of seawater and protected from dust within the temperature range of -5°C to
+45°C.
Protect the devices from impacts, scratches and moisture. Note that the load-bearing capacity of the
substrate must be according to the weight of the devices.
Use the devices only in dry rooms free of seawater air (<65% humidity).
The devices are usually delivered completely assembled. In rare cases, it may be necessary to ship the
units partially disassembled for transport reasons. In these cases, please use the corresponding assembly
instructions and follow the instructions given!
When setting up the unit for the first time, it is important to know the maximum achievable range of
motion for the particular version to be installed. The clearance area around the unit must be at least 60
cm to ensure safe access and exit from the unit, also in emergencies. However, the safety clearances may
overlap.
The following Figure 1 shows an exemplary arrangement of compass ® 600 devices.
The device must be set up on a level, impact-resistant surface that can withstand the load of the device
and the maximum permissible body weight of the user of 200 kg.
To compensate for unevenness, the unit has adjustable feet that can be adjusted in height. An important
prerequisite for proper functioning of the device is alignment with a spirit level.
Avoid installing the equipment in heavily frequented rooms or near doors and passageways.
Figure 1
Area until
next device
Active
Training area