Proxomed compass 210 Abductor, Руководство пользователя

Страница: 28 / 38

28
6 Commissioning
Before commissioning, check the proper condition of the:
✓
Hydraulics for visible damage, especially to the respective end fastening.
✓
Check the function of the locking bolt, the locking button must engage automatically.
✓
Stability.
✓
Screw connections - check for tight connection.
✓
Welded joints - visual inspection.
✓
Movement function OK.
Check before each use:
✓
Locking bolt on secure fixation
✓
Resistance adjustment on the resistance system
7 General application
Before starting each exercise, make sure that all locking pins on the adjustable parts of the respective
training device are fully locked. Do not pull on any of the locks while performing the exercise. Before
each exercise, ensure correct biomechanical positioning in terms of pivot point, joint adjustment, etc.
Pay attention to the correct locking of the adjustment devices. No adjustment devices should protrude.
• When exercising on the compass®210 machines, light, air-permeable and close-fitting clothing
is recommended.
• Stop the training immediately if the client feels unwell. In case of nausea or dizziness,
additionally consult a doctor.
•
It should always be possible to perform the training exercises without pain. If discomfort occurs,
the training should be discontinued. A doctor or therapist should be consulted.
•
Training with clients may only be carried out under appropriate supervision.
•
The settings on the unit should be made with due care. Read the relevant passages in the
instructions for use.
•
The resistance system has a fixed maximum load setting that cannot be exceeded. This is set
individually for each unit. Resistance beyond this maximum is not possible for safety reasons.
•
The load on the muscles during training is exclusively concentric.