Proxim RANGELAN2 7510, Руководство пользователя

Страница: 53 / 103

46
The RangeLAN2 752x Access Point supports the following MIBs:
❑
MIB-II (RFC 1213)
❑
IEEE 802.1d Bridge MIB (RFC 1493)
❑
Extended Ethernet MIB (RFC 1643)
❑
Proxim Enterprise MIB
The Proxim Enterprise MIB is supplied in ASN.1 format. It is available on the
Proxim BBS and Web site. The filename is AP7520.MIB. Follow the instruc-
tions in your SNMP management package for incorporating enterprise-specific
MIBs.
Note:
The RangeLAN2 Access Point is not manufactured with a default IP address.
In order to SNMP manage the RangeLAN2 Access Point, you must first assign
it a valid IP address for your network using null modem cable configuration
or a BOOTP server.
You may choose to configure the RangeLAN2 752x Access Point through the menu
trees (in-band or out-of-band) to set SNMP parameters before using an SNMP manager.
Enable/Disable SNMP allows you to enable or disable SNMP management of
the RangeLAN2 752x Access Point.
The Read-Only SNMP Community parameter specifies a community sup-
ported by the RangeLAN2 752x Access Point. Actions permitted by this
community are “read-only” (GET and GET-NEXT). SET attempts using this
community will result in rejection of the attempt with a general error response
and the generation of an authentication trap (if so enabled).
The Read-Only SNMP Manager IP Address specifies the IP address of the
SNMP manager which is permitted to use the Read-Only SNMP Community.
An address of 0.0.0.0 indicates any manager may use this community.