Prowinch PWJTHF, Руководство пользователя

Страница: 6 / 51

6
Safety Bulletin
6
DO NOT
DAILY CHECKLIST
1.
DO NOT Operate, install, or repair the hoist unless trained and authorized.
2.
DO NOT Operate the hoist unless you have first read the operator’s manual.
3.
DO NOT Operate the hoist without appropriate PPE and without performing a pre-shift
inspection.
4.
DO NOT Operate the hoist if not complying with all required OSHA regulations.
5.
DO NOT Lift more than the rated load.
6.
DO NOT Lift people or lift loads over people.
7.
DO NOT Wrap the hoisting rope or chain around the load.
8.
DO NOT Operate with the chain/rope not properly seated in the sprockets, drum, or sheave.
9.
DO NOT Operate unless the direction of the hook travel agrees with the direction shown on the
control.
10.
DO NOT Operate the hoist unless the hook travel limit devices function properly.(Test without
a load PRE-SHIFT )
11.
DO NOT Operate the hoist with twisted, kinked, damaged, dirty, or unlubricated chain or
rope.
12.
DO NOT Operate a damaged or malfunctioning hoist.
13.
DO NOT Operate the hoist when the hook is not centered under the hoist
14.
DO NOT Remove or obscure this tag or other WARNING & SAFETY LABELS
.
B30.26 Rigging Hardware.
B30.27 Material Placement Systems. B30.28
Balance Lifting Units. B30.29 Self-Erecting
Tower Cranes. B30.30 Ropes.
TAGGED HOIST: Ensure the crane or hoist is not tagged out of order.
CONTROL DEVICES: Test Run. Ensure all motions agree with control device mark-ing.
BRAKES: Check all motions for excessive drift and abnormal stopping distances.
HOOK: Check for damage, cracks, nicks, gouges, deformations on throat opening, wear on saddle or
load-bearing point, and twist.
HOOK LATCH: Check for proper operations.