Proware EP-4643S2D2-F8S6, Руководство пользователя

Страница: 123 / 151

Fibre to SAS/SATA Disk Array
User Manual 123
5.5.4 Fibre Channel Config
To set the Fibre Channel Configuration function, move the mouse cursor to the main
menu and click on the
Fibre Channel Config . The Fibre Channel Configuration
screen will be shown. Configure the desired function.
WWNN (World Wide Node Name)
The WWNN of the FC RAID system is shown at top of the configuration screen. This is an
eight-byte unique address factory assigned to the FC RAID, common to both FC ports.
WWPN (World Wide Port Name)
Each FC port has its unique WWPN, which is also factory assigned. Usually, the
WWNN:WWPN tuple is used to uniquely identify a port in the Fabric.
Channel Speed
Each FC port speed can be configured either as 4Gbps or 8Gbps channel. Another option
is to use “Auto” for auto speed negotiation between 4Gbps/8Gbps. The RAID system’s
default setting is “Auto”, which should be adequate under most conditions. The Channel
Speed setting takes effect during the next connection. That means a link down / link up
should be applied for the change to take effect. The current connection speed is shown
at end of the row. You have to click the “Fibre Channel Config” link again from the menu
frame to refresh the current speed information.