CRW 200 Service Manual
7/13
4.3.4
•
Rebuild the winch set in reverse
order.
Pay attention on the
proper installation of the cable
loop (8) on the pins (9).
4.3.5
•
Install the drum on the Rotating
Jig.
•
Wind the cable by turning the
drum to the right with the aid of
Allen wrench 6mm
(10)
.
4.4. The brake set maintenance and inspection
4.4.1
•
Seat the brake unit on the
Rotating Jig. Pay attention to
lock the Jig's pin
(1)
in the
part's relief
(2)
.
•
Secure the rotating jig table
against rotation with the aid
of pin
(3)
.
4.4.2
•
Take off the Φ8 locking ring (
4
) and the dog
(5)
from the dog’s axle
(6)
.
•
Detach the dog's spring (7) from the pin (8).
Carefully inspect:
−
dogs (
5
) - attack edge cannot be worn down;
−
dog's axle (
6
) - any axle movement is a
failure.
−
the dog’s springs (
7
) - the spring’s threads
should adhere each other and the spring eye
should be round;
Carefully clean all parts. Replace, if
appropriate.
8
9
9
10
1
2
3
4
6
5
7
8
