CRW 200 Service Manual
5/13
4.1.5
•
Unscrew the bolt
(10)
with the aid of
cross tip
screwdriver.
Take off the
washer
(11)
and crank
plate
(12)
.
•
Unscrew the
(13)
bolt
with the aid of Allen
wrench and
(14)
bolt with
the Allen wrench 3mm.
•
Take off the crank
(15)
from the shaft.
4.1.6
•
Unscrew the (16) nut and
take off the crank shaft.
•
Unscrew the (19) screw
with the aid of Allen
wrench 5mm and take off
the (18) spring and (17)
pin.
4.1.7
•
Unscrew 6 screws
(18)
with the aid of Torx type
wrench T-25.
•
Open the cover set
(19)
.
•
Unscrew licking unit (20)
and take off the washer
(21)
4.1.8
•
Unscrew 3 M8 bolts
(22)
with the aid of Allen
wrench 6mm and take off
the winch set
(23)
from
the casing.
•
Take off the locking pin
set
(20)
from the casing.
4.1.9
•
Take off snap ring 20mm
(24) and take off the
brake unit (25) from the
shaft.
•
Take off the snap ring
20mm (26) and washer
(27) from the shaft (28).
•
Take off the shaft (28)
from the casing
4.1.10
•
Clean and inspect: main casing, bush and dog's gear, washer.
•
Replace snap ring (26) with new one.
10
11
12
13
14
16
17
18
19
15
18
19
21
20
23
22
20
24
25
27
26
28
