CRW 200 Service Manual
11/13
4.6.6
•
Mount the crank (19) and
the screws (20) and (21).
Glue the screws with the aid
of anaerobic adhesive.
•
By turning the crank to the
right, tight the winch brake.
(You should listen sound
like - "click ... click ... click).
•
Mount the crank plate (22)
onto shaft. Pay attention to
position the crank plate in
relation to crank according
arrangement (23).
•
Fix the crank plate with the
aid of washer (24) and M5
screw (25). Glue the screw
with the aid of anaerobic
adhesive.
4.6.7
•
Mount the parallel key (26)
into shaft slot and put the
drum set (27) on the shaft.
•
Fix the drum set with the aid
of M6 screw (28) and
washer (29).
4.6.8
•
Rotate the drum unit
8 full
turns to the left
in order to
make initial tension of the
retracting spring.
•
Insert the cable and the
bumper’s spring set (30)
into casing slot.
•
Mount the Z38 locking ring
(31) onto bush.
4.6.9
•
Mount the drum's cover (32)
onto body.
•
Fix the cover with the aid of
6 x M5 screws (33). Use the
Torx type wrench T25.
anaerobic
adhesive
click ... click ... click
x8
19
glue
21
20
23
22
24
25
glue
glue
25
21
20
26
27
28
29
30
31
33
32
