Q80S_2014
18
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 [email protected] - www.proteco.net
PRE-BLINKING Function
This function makes the flashing light
pre-blinking
for
4-5 seconds
before the gate starts opening.
1 Use
buttons to move inside the menu, till the display shows:
2 Press button
to confirm.
3 Use buttons to select:
PRE-BLINKING Function
OFF
PRE-BLINKING Function
ON
4
Pre
ss button
to go back to the top level menus,
then press button
again till the display shows:
or wait the timeout (20 seconds) to exit
.
4.4
FUNCTIONS menu
Use this menu to enable/disable special settings.
= function is
ON
= function is
OFF
Press button
and use
to select menu ,
then press button
to enter the FUNCTIONS menu: display will show
Use
buttons to scroll the lower level menus:
MULTI-OCCUPATION Function
This function grants
priority to the opening command
; when two people activate the gate
at the same time the first opening command prevails, while opening the control panel ignores
any further command.
1 Use
buttons to move inside the menu, till the display shows:
2 Press button
to confirm.
3 Use
buttons to select:
MULTI-OCCUPATION Function
OFF
MULTI-OCCUPATION Function
ON
4
Pre
ss button
to go back to the top level menus,
then press button
again till the display shows:
or wait the timeout (20 seconds) to exit.
