Page 12
NB:
Table above total A+B dimensions includes a 10mm buffer
Diamond 3Ti
A+B
= 300mm
Diamond 4Ti
A+B
= 400mm
Pivot Bracket (S1) and Dimension B
The motors pillar pivot bracket dimensions
DO
count as part of the Dimension B figure.
This bracket has three holes and is shaped according to left hand or
right hand mounting – (illustrated left).
The bracket is fabricated from mild steel and has galvanised coating for durability in weathering. The
bracket is designed to be cut-down using an angle grinder for incidences where not all of the bracket
holes have been used.
For example, the first hole of the
bracket has been used leaving the
other two holes vacant. These two
holes on the bracket would be
removed (cut –off) to allow the motor
to pivot freely and obstruction free.
