Protean Instrument Corporation
75
Data MPC
900
The top left button allows you to toggle between viewing the alpha and beta
background. The + and – buttons allow fine control of the cursor to look at various
points. The vertical green bar is your cursor. Pressing the vertical blue bars causes the
cursor to snap to that line if there are points at that location otherwise the button
presses are ignored. This feature eliminates the need for mu and – button
presses to get to the beginning or end of the data set. Below the + and – buttons are
data for the current cursor position. Pressing the
DELETE
button deletes the point at
the cursor location.
Pressing the
SETTINGS
button allows viewing of the control chart settings.
The first line is the control chart name. The second line is the counting mode used
during acquisition. The third line is the amount of time for each acquisition.
The date range is the date of the first limit point to the date of the last limit point that is
used in the Alpha and Beta Mean and Standard Deviation values which are shown on
the last four lines.
