Prima IP User Manual Rev 1.5 2007
- -
81
Chapter 5.
Local Console Operation
This chapter provides general guidelines for Prima IP local console operations. Before you begin operation
of the local console, we strongly recommend that you read this chapter in advance. The Quick Reference
Sheet in the Quick Installation Guide can also serve as an equal reference.
There are three ways to operate your Prima IP KVM switch: by front-panel buttons, by keyboard hotkeys
and by OSD menu options.
5.1
Front-panel Buttons
Use the front panel push buttons to select directly the active. Pressing the push button during normal
operation will select the corresponding port.
5.2
Keyboard Hotkeys
Most of the hotkey control commands start with two consecutive
Scroll Lock
keystrokes (done within 2
seconds), followed by one or several command keys:
Hotkey Control Command = ScrLk + ScrLk + Command keys
In most cases, it will take at least three keystrokes to complete a command. In certain case, you will need six
strokes (such as in selecting specific bank and port number for active channel) to complete one.
The following table summarizes all available hotkey for your convenience.
Command
Hotkeys / OSD menu option
Select PC
ScrLk + ScrLk + (a) + (b) + (y) + (z)
(1)
(a)+(b) = 2-digit bank number
(y)+(z)= 2-digit channel number
Next lower channel
ScrLk + ScrLk +
↑
(arrow up)
Next higher channel
ScrLk + ScrLk +
↓
(arrow down)
Next lower bank
ScrLk + ScrLk + PgUp
Next higher bank
ScrLk + ScrLk + PgDn
Beep Sound On/Off
ScrLk + ScrLk + B
Show OSD menu
ScrLk + ScrLk + (Space Bar)
OSD Title Bar ON/OFF
ScrLk + ScrLk + T
(1) (a), (b), (y) and (z) are number keys. (a) + (b) = 01 ~ 16; (y) + (z) = 01 ~ 08 or 01 ~ 16.
Within 2 seconds
