Prima IP User Manual Rev 1.5 2007
- -
49
4.7.2 PPP Server Settings
Current Local IP Address:
This is where you can check up the IP address of the
Prima IP
when a PPP
connection is established. However, if the PPP connection is not yet established, the IP address will be
shown as
Unknown
. This address is normally which one is set into
Local IP Address
.
Note:
This IP address must be distinct from the one that is used by the
Prima IP
on the LAN.
Local IP Address:
Enter here the IP address (default = 192.168.2.200) to be used by the
Prima IP
in the
PPP connection. This IP address will be used only in PPP connection by
Prima IP
alone, and should be
distinct from the IP address (default = 192.168.1.200) that is specified in the
LAN TCP/IP
page and used for
connection via direct local area network.
Peer IP Address:
Enter the IP address (default= 192.168.2.201) that will be assigned by
Prima IP
to the
peer client at connection time.
Maximum Speed:
Specify the modem connection speed. The
Prima IP
supports a high-speed serial
connection up to 1 Mbps (Megabits per second).
Note:
the modem connection speed is NOT the PPP connection speed, which depends on the modem
technology. For example, even if the modem connection speed is 115 200 bps, a 56K modem will
provide only a 56 000 bps PPP connection.
User Name:
Specify the user name that must be used for the PPP connection login by the peer computer on
the other side of the phone line/serial connection.
Password:
Specify the password that must be used by the peer computer, then type in the same password in
the next entry field to confirm the password.
Note:
Prima IP
can support only one User Name / Password and one PPP connection at a time.
Modem Initialization (chat script):
The modem initialization script is a chat script that will initialize the
modem to be ready for connection. The standard script provided by default permits to connect a Windows
client to
Prima IP
in server mode over a direct serial cable (Null Modem).
TIMEOUT 3600
CLIENT CLIENTSERVER\c
In other words, wait for "CLIENT" one hour, and respond CLIENTSERVER without carriage return.
