User Guide
P.15
•
Press
¾
¾
+
: .................................................
LOCK
•
Press
¾
¾
+
:
..................................................
UNLOCK
•
Press
¾
¾
+
: ................................................................... START
•
Press
¾
¾
+
:
....................................................
STOP
•
Press
¾
¾
+
:
..................................................
TRUNK
Start/Stop While in Safe Start Mode
Function
Button press
Icon
Sound
Description
Start on safe start
mode
+ x 2
+
Melody
Press
+
simultaneously twice within 3
seconds. Press for 1 sec- a
beep will be heard- then
press 1sec and a melody will
be heard again.
Stop on safe start
mode
+
None Melody
Note: Your remote control must be configured for second car operation by the installer.
OEM
Style
Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the
ignition.
•
To arm the OEM-style alarm, press the
button on the transmitter.
- The OEM-style alarm will ONLY arm if the
button on the transmitter is pressed.
- The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now
armed.
•
To disarm the OEM-style alarm, press the
button on the transmitter.
- To stop the horn from sounding if the OEM-style alarm is triggered, press the
or
button, or put the system in and out of Valet Mode (page-9)
Intrusion
Codes
via
horn
T
he system monitors the following:
•
Doors
•
Hood
•
Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1minute.
If an intrusion has occurred and
pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
Diagnostic table:
1x = power interruption
4x = Doors intrusion
3x = Hood
6x = Ignition
