manualshive.com logo in svg

ProStart CT-3471 TW, Руководство пользователя

Поделиться
Скачать
ProStart CT-3471 TW Скачать руководство пользователя страница 9

User Guide

 

P.9

 

1.

 

With the engine running, make sure to release the brake pedal and press the 

, 

 or 

  button on the transmitter until the parking lights come ON. 

2.

 

Remove the ignition key from the ignition switch.  
The engine will continue running. 

3.

 

Exit the vehicle and close all doors, hood and trunk. 

4.

 

Press the 

 button to lock the doors, to arm the starter kill and to arm the OEM style 

alarm. 

If your vehicle has a manual transmission, Idle Mode can be activated through the same routine 
as that used for Ready Mode (page-7); at the last step, press 

 button to lock the doors, arm the 

system and leave the engine running. 

Note1: The engine will continue running until the user re-enters the vehicle or until the expiration of 
the engine run time. 
Note2: If the pre-programmed run-time expires or if the user shuts down the engine by remote 
control, the vehicle will enter Ready Mode. 

Caution!!! Do not leave children or pets unattended in a vehicle standing in Idle Mode. 

Valet

 

Modes

  

When the vehicle is in Valet Mode, the remote starter and alarm functionalities are disabled. If the 
vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from 
being remote-started accidentally. 

 

Any of the following features will put your remote car starter into Valet Mode: 

Ignition Valet: This feature allows you to put your system into Valet Mode by using the 

 ignition 

key. 

Remote valet: This feature allows you to put your system into Valet Mode by using the 

 transmitter. 

 

To

 

put

 

the

 

system

 

into

 

Valet

 

Mode

 

To put the system into Valet mode using the KEY (Ignition Valet Mode): 

1.

 

Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times 
successively into the IGNITION/RUN and OFF positions. 

2.

 

The parking lights will flash three times.  

3.

 

Turn the ignition OFF. 

4.

 

The LED on the antenna will come ON solid to indicate that the vehicle has successfully 
entered Valet mode. 

5.

 

The 

 icon will appear on your LCD remote. 

 
To put the system into Valet mode using the TRANSMITTER (Remote Valet Mode): 

1.

 

Press the 

 

and   buttons simultaneously until the 

 icon will appear on your LCD 

remote. 

2.

 

The LED on the antenna will come ON solid to indicate that the vehicle has successfully 
entered Valet mode. 

 

Содержание CT-3471 TW




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды