Configuration and Start-Up
PS69-DPS
♦
CompactLogix or MicroLogix Platform
Profibus DP Slave Communication Module
ProSoft Technology, Inc.
Page 35 of 94
January 12, 2009
Configuration Size: The size for the configuration array must be always 32
Words.
Note:
If the parameters do not correspond to the template values, then the controller cannot
establish communication with the module.
2.3.3 Generic Extra Data Config
If you select the "
Generic Extra Data Config
" Tab you can enter a configuration
for the module manually. For the first project it is not necessary to enter any
configuration data here. If you don't enter any configuration data the slave will
receive its configuration data from the Profibus master. For more information
about the slave configuration see the following section
"Slave Configuration
"
The meaning of each word of the configuration array can be found in section
"Configuration by Controller Application".
Select
OK
to end the I/O configuration of the module.
2.4 Slave
Configuration
2.4.1 General
The following section will detail the basics of configuring the PS69-DPS module.
The PROFIBUS-DP Slave module does not require a configuration tool. There
are two ways to configure the Slave module. These two methods are described
in the following sections.
