ProSoft Technology PS69-DPM Скачать руководство пользователя страница 11

Страница: 11 / 130

PS69-DPM ♦ CompactLogix or MicroLogix Platform

Contents

PROFIBUS DPV1 Master

User Manual

ProSoft Technology, Inc.

Page 11 of 130

October 1, 2014

1.7

Installing the Module

Before you attempt to install the module, make sure that the bus lever of the adjacent
module is in the unlocked (fully right) position.

Warning: This module is not hot-swappable!

Always remove power from the rack before inserting or

removing this module, or damage may result to the module, the processor, or other connected devices.

Align the module using the upper and lower tongue-and-groove slots with the adjacent
module and slide forward in the direction of the arrow.

Move the module back along the tongue-and-groove slots until the bus connectors on
the PS69 module and the adjacent module line up with each other.

Содержание PS69-DPM



































































































































Результаты поиска

Содержание PS69-DPM

Отзывы:

Похожие инструкции для PS69-DPM

Бренды по названию

Популярные бренды

ProSoft Technology PS69-DPM, Руководство пользователя

Результаты поиска

Содержание PS69-DPM

Отзывы:

Похожие инструкции для PS69-DPM

Бренды по названию

Популярные бренды