PLX30 Series
EIP Protocol
Ethernet and Serial Gateways
User Manual
ProSoft Technology, Inc.
Page 83 of 200
September 19, 2012
Select the
COMMUNICATION COMMAND
to execute from the following list of
supported commands.
PLC5 Type Read
PLC2 Unprotected Read
PLC5 Typed Read to PLC
PLC Typed Logical Read
The
TARGET DEVICE DATA TABLE ADDRESS
must be set to a valid file
element (such as, N11:0) for SLC and PLC5 messages. For the PLC2
Unprotected Read message, set the address to the database index (such as,
1000) to consider with the command.
The
MULTIHOP
option must be set to
YES.
The
MULTIHOP
tab portion of the
dialog box must be completed as shown in the following window:
Set the IP address value to the
gateway’s Ethernet IP address. The "Insert" key
must be pressed to add the second line for ControlLogix Backplane and set the
slot number to zero.
