PLX30 Series
EIP Protocol
Ethernet and Serial Gateways
User Manual
ProSoft Technology, Inc.
Page 79 of 200
September 19, 2012
Set the
READ/WRITE
parameter to
READ.
The gateway supports a
TARGET
DEVICE
parameter value of
500CPU
or
PLC5.
In order to complete the
configuration of the MSG instruction, select the
SETUP SCREEN
area of the
MSG object. This displays the following dialog box.
The
TARGET DEVICE DATA TABLE ADDRESS
must be set to a valid file
element (such as, N11:0) for SLC and PLC5 messages. The
MULTIHOP
option
must be set to
YES.
Fill in the
MULTIHOP
tab portion of the dialog box as shown in the following
illustration.
Set the IP address value to the gateway’s Ethernet IP address. The "Insert" key
must be pressed to add the second line for ControlLogix Backplane and set the
slot number to zero.
