ProSoft Technology BM GM1K Series, Руководство пользователя

Страница: 32 / 101

Installation
Page 32 of 101 ProSoft Technology, Inc.
January 8, 2018
2. Secure DataRail to DIN rail by attaching an End Terminal Bracket.
a. Hook the metal end of the Bracket to DIN rail and then snap the other end
onto DIN rail into place. (Be sure to position the Bracket far left of the
DataRail where metal blades meet the plastic)
Attach components from left to right without gap.
3. Attach Radio Module to DataRail (place it next to the Bracket without a gap).
a. Latch the top hook onto the rail, then snap-in the spring-loaded clip into
place.
b. Connect Antenna. Radio Module is equipped with MMCX (female)
connector. For outdoor installation, place a lightning arrestor between
Antenna and Radio Module connection.
1) Firmly hold and connect MMCX end of the antenna cable to Gateway
Radio (listen for a “click” sound for confirmation).
2) Connect Lightning Arrestor (optional
– highly recommended)
3) Drilling a hole may be required for routing antenna cable
– use 5/16” or
larger diameter, user must supply own O-ring/sealing
4) Use proper fittings to seal hole for antenna cable