ProSoft Technology BM GM1K Series, Руководство пользователя

Страница: 76 / 101

COM Port Setup and Wireless I/O Designer
Page 76 of 101 ProSoft Technology, Inc.
January 8, 2018
11. The point(s) is automatically mapped to its Modbus register holding table.
12. Using Shared Point based on interval or on change.
a. Double-click Gateway_2 .
b. Click on the Exports tab.
c. Right-click on the point and select Interval
…
.
d. If the time value equals 0, then the point will be shared on change.
i. On Change means the value changed or new RF packet received.
e. If a point is set to a specific interval, then the Gateway will send the point
according to the interval, regardless change in value.
13. Save project file.
14. Update both Gateways for changes to take place.
9.8 Modbus Master Function
The
Gateway’s Serial/RTU port and WIO Gateway’s RS485 port can be
configured as a Modbus Master.