V1.0
100 pc Air Tool Kit
8844151
Visit www.princessauto.com for more information
29
AIR HAMMER
SPECIFICATIONS
Air Inlet
1/4 in.
Working Pressure
90 PSI
Air Consumption @ 90 PSI
2.8 CFM
CFM @ Full Load
25 CFM
Blows per Minute
4,500 BPM
Shank
13/32 in.
Bore Diameter
3/4 in.
Min. Hose Size
3/8 in.
Material
Composite Housing
ADDITIONAL SAFETY PRECAUTIONS
1. Read and follow all instructions in the Tool Kit Safety section before
using this tool.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3. Before using this tool, make sure you know the work area and
material you are working on. Make sure you do not accidentally
puncture pipes, pressurized containers or electrical cables.
4. Keep hands and other body parts away from the chisel to avoid
injury.
5. Only use with accessories rated to handle the forces exerted by
this tool during operation. Accessories not designed for the forces
generated may break and forcefully launch pieces.
6. The chisels will become hot while chipping. Allow the chisels to
completely cool before touching.
7. When chipping in a potentially explosive environment, use a spark
resistant chisel (usually made of beryllium copper).
8. Replace chisels that are worn or blunt at the cutting edge or shank. A
damaged chisel may damage the air hammer, reduce efficiency and
increase vibration. A chisel that breaks during use can cause an injury.
