Prophete INDEX-14, Руководство по эксплуатации, Страница: 115 / 444

Eng
lish
EN 23
SADDLE | SEAT POST
SADDLE | SEAT POST
SETTING THE HEIGHT
The saddle height should be set so that the knee is not stretched all
the way when cycling while the tips of the feet can reach the ground
(
60
).
1. Loosen the clamp of the seat post. For this, depending on versi-
on, use a 5 or 6-mm hexagonal socket wrench
61
.
2. Adjust the desired saddle height. Pull out the seat post no more
than to the mark.
3. Tighten the screw according to the torque specification (s.
chapter torque specifications).
If the seat post is fastened with a quick clamp, proceed as de-
scribed in the chapter on the quick clamp for releasing or clo-
sing it.
SET THE INCLINATION AND POSITION
The saddle position (distance from the handlebar) and the saddle
inclination can be set individually. Inclination of the saddle should
be about horizontal. Since the "correct" saddle inclination is, ho-
wever purely subjective, it may differ from cyclist to cyclist.
Depending on the seat post and saddle used, the inclination or po-
sition of the saddle can be set differently:
SEAT POST WITH CLAMP
1. Use a 13 mm hexagon wrench to release the nut at the side of
the seat clamp
62
. In some models, the counter-screw must be
WARNING!
DANGER OF ACCIDENT!
• Check the attachment screws and quick clamps for tight fit before every ride and
in particular after setting the saddleposition.
DANGER OF BREAK AND ACCIDENTS!
• Pull out the seat post at least to the mark of the minimum insertion depth. The
mark must not be visible. WARNING!
60
61
62