Prophete INDEX-14, Руководство по эксплуатации, Страница: 111 / 444

Eng
lish
EN 19
HANDLEBAR
STEM WITH ANGLE ADJUSTMENT
SETTING THE POSITION AND HEIGHT
1. Loosen the clamp screw
44
with a 6 mm hexagon socket wrench.
2. 2. Adjust the handlebar position or stem height to suit you. Al-
ways observe the mark of the minimum insertion depth
45
. (No
warranty if this is not observed!)
3. Tighten the clamp screw
44
again according to the torque speci-
fication (s. chapter Torque specifications).
SET STEM ANGLE
1. Loosen the lateral clamp screw
43
with a 6 mm hexagonal
socket wrench.
2. Now adjust the desired angle at the stem.
3. Then tighten the clamp screw
43
again according to the torque
specification (s. chapter Torque specifications).
SETTING THE HANDLEBAR INCLINATION
1. First loosen the clamp block screw of the handlebar
46
attach-
ment with a 4 or 5 mm hexagonal socket wrench.
2. Adjust the inclination angle of the handlebar.
3. Tighten the clamp block screw again well (s. chapter Torque spec-
ifications).
4. Turn the handlebar attachments (e.g. brake lever) back to the
starting position if necessary.
46
43
44
45
DANGER
DANGER OF DAMAGE AND ACCIDENTS!
• The stem must not be pulled out beyond the mark! The mark of the minimum in­
sertion depth must not be visible.